Portbase User Guide
When connection mode is DHCP, current subnet mask is displayed, but it is not editable.
z
Gateway
(Default:
192.168.1.1)
Current default gateway Portbase is assigned to.
When connection mode is Static IP, manually enter an appropriate default gateway.
When connection mode is DHCP, current default gateway is displayed, but it is not editable.
z
DNS
IP address of DNS server that Portbase uses.
NMS Configuration
If multiple devices are installed and managed together, integration in management is necessary. In
addition, it is often the case when the device reports an erroneous status, figuring out the reason for the
failure becomes a time-consuming job. To solve this inefficiency and provide better solution, Portbase
includes Network Management System software, Portview.
z
SNMP
(Default: Disable)
Options: Enable / Disable
Enable or disable SNMP(Simple Network Management Protocol) support.
MIB-II (RFC 1213):
System, Interface, IP, ICMP, TCP, UDP
MIB-I (RFC 1317):
Serial Interface
z
PortView
(Default: Disable)
Options: Enable / Disable
Enable or disable Portview.
When enabled, following configuration options are available.
23
ECHIPAMENTE PENTRU AUTOMATIZĂRI
Electric Film S.R.L. — Aleea Scarisoara 3, Apt.42 ▪ Cluj Napoca, Cluj ▪ 400445 ▪ www.electricfilm.eu
VÂNZĂRI ▪ 0364 710319 ▪ [email protected] ▪ SUPORT TEHNIC ▪ 0788 250583
cele mai sensibile
23/45
