SystemBase C530xr, Руководство пользователя

Страница: 12 / 18

12
Email Alert Messages
The codec can be configured via the Ethernet
Webserver to send an Email Alert message
following Sync Loss.
In the Send To This E-mail Address box, type
the e-mail address where the alerts will be
sent. Enter the full e-mail address (for
example,
test@systembase.com . If you leave
this box blank, no alerts or logs will be sent
to you.
In the Outgoing Mail Server box, type the
name or IP address of the outgoing SMTP
mail server of your ISP (for example,
mail.myISP.com). If you leave this box blank,
no alerts or logs will be sent to you.
In the Subject box, enter the text to be
displayed in the email subject line.
If you leave this box blank, no alerts or logs
will be sent to you.
Email Timing
Once the Email Alert has been configured
correctly, the codec will send an email Event
Log 10 seconds after a Sync Loss has
occurred. The Event Log will then be cleared
and disabled for 15 minutes before being re-
enabled again.
If the codec is unable to send the email
successfully, then the Event Log will be
cleared and returned to the enabled state.