Topvex FR800, FR1600, FR3800
Operation and Maintenance Instructions
Systemair Inc.
6
3 Interface Description
3.1 Control Panel
The SCP control panel is delivered with a 32 ft. (10 m) cable that is connected to the panel and with a fast
coupling contact, connected to the Topvex unit. The contact is connected to the
Corrigo™
controller in the
electrical connection box (pos.1, figure 3). The cable can be unscrewed in the back of the control panel
(figure 4).
3.1.1 Operating the control panel
Fig. 4 The control panel
Position Explanation
1
Alarm button: Gives access to the alarm list.
2
Alarm LED: Indicates alarm by flashing red light.
3
Write LED: Indicates by flashing yellow light that parameters can be set or changed.
4
OK button: Press this button to be able to change or set parameters whenever possible. Also
used to move between chargeable parameters in one dialogue window frame.
5
Cancel button: Used to abort a change and return to the initial setting.
6
Right/Left & Up/Down buttons: Used to move up, down, left & right in the menu tree. Up/Down
buttons are also used to increase values when setting or changing parameters.
7
Mounting holes
8
Connection block.
9
Connection to yellow cable.
10
Connection to orange cable.
11
Connection to red cable.
12
Connection to brown cable.
13
Connection to black cable
3.1.1.1 Navigating the menus
The start display (the display normally shown) is at the root of the menu tree. Pressing DOWN will move
you through the menu options. UP will move you back through the options. To enter a higher menu level,
Table 3: Description of Control panel and wire connection
10
12
11
13
8
7
9
4
3
1
2
6
5
