background image

6.    TEST RUNNING

Operate according to "gist for test running" on the electric control box  
cover. 

Test running can not start until the outdoor unit has been  
connected to the power for 12hr.  

Test running can not start until all the valves are affirmed  
open. 

Never force run the unit. (Or the protector sits back, 
danger will occur.)

CAUTION 

7.    PRECAUTIONS ON REFRIGERANT 

       LEAKAGE

This air conditioner(A/C) adopts inncouous and nonflammable 
refrigerant. The locating room of the A/C should be big enough 
that any refrigerant leakage is unable to reach critical thickness.
So certain esssential action can be taken in time.

A[kg] 

B[m ] 

Critical amount------the Max. amount of Freon without any 
harm to person.

Refrigerant critical amount: 0.44[kg/m ] for R410A. 

3  

Confirm the critical amount through the following steps, and take 
necessary actions. 

1. Calculate  the  sum  of  the  charge volume  (A[kg]) Total  
    Refrigerant volume of 10HP=factory refrigerant  
     superaddition   

2. Calculate  the  indoor  cubage  (B[m ]) (as  the  minimum  
    cubage. 

3. Calculate the refrigerant amount

İ

critical amount

Counter measure against high amount

1. Install mechanical ventilator to keep the refrigerant amount
    under critical level. (ventilate regularly)

   

2. Install leak alarm facility related to mechanical ventilator if  
    you can not regularly ventilate. 

b. Leak alarm related to mechanical ventilator 

A. Ventilation  
    peristome  

(Leak hunting siren should be installed in  
places easily keep refrigerant)  

Indoor unit 

Outdoor unit 

Indoor unit 

Room full of leak refrigerant 

(All refrigerant has run up) 

12

installation manual 

8.    TURN OVER TO CUSTOMER

The owner's manual of indoor unit and owner's manual of  
outdoor or unit must be turned over to the customer. Explain  
the contents in the owner’s manual to the customers in details.  

Please press “constraint cool” button to carry out refrigerant  
recycling process. Keep the low pressure above 0.2MPa, other  
wise compressor may be burnt out.   

Fig. 7-1 

NOTE 

  1 

 

ON   

Obtain network address automatically 

 

OFF    Obtain network address manually 

  

  2 

  

ON   

Revocation indoor unit network address 

  

OFF   

SW3

˄

SW-1

˅

Table 5-3 

Содержание SYSVRF AIR EVO HP Mini















Отзывы: