SystemAir F-B90 Скачать руководство пользователя | Manualshive

Страница: 4 / 69

background image

4/69 |

F-B90

• 11 or 22
Fire damper with two sides with sheet metal grille, Zinc coated (11) or RAL9003 Powder coated (22). Type suitable to be used as Air
Transfer Grille.

Activation Types

• H0
Fire damper with a manual crank activation mechanism and with a spring return release mechanism activated by a fusible thermal link
set to 74°C.
• H2
Fire damper with an activation mechanism H0 + open and closed indication with AC 230 V or AC/DC 24 V contact switches.
• B230T or G230T
Fire damper with an activation mechanism with a Belimo (B230T) or Gruner (G230T) spring return actuator (230V AC) with an electro-
thermal fuse 72°C and auxiliary switches.
• B24T or G24T
Fire damper with an activation mechanism with a Belimo (B24T) or Gruner (G24T) spring return actuator (24V AC/DC) with electro-
thermal fuse 72°C and auxiliary switches.
• BST0 or GST0
Fire damper with an activation mechanism with spring return actuator Belimo (BST0, AC/DC 24 V, supply through com. unit: AC 230 V)
or Gruner (GST0, AC/DC 24 V, supply through com. unit: AC 24 V) with an electro-thermal fuse 72°C and auxiliary switches, with a
Belimo supply and communication unit BKN230-24 or Gruner supply and communication unit fs-UFC24-2 (other communication units
on demand).
• B24T-SR or G24T-SR
Fire damper with an activation mechanism with a Belimo (B24T-SR) or Gruner (G24T-SR) spring return actuator (24V AC/DC) with
electro-thermal fuse 72°C and auxiliary switches for Modulated dampers (possibility to open the blade at the desired angle).
• BSD230T or GSD230T (Only for Grille types 11 and 22)
Overflow fire damper with Smoke Detector fitted activation mechanism (230V AC) with a Belimo or Gruner spring return actuator with
an electro-thermal fuse 72°C and auxiliary switches, with a Belimo supply and communication unit or Gruner power supply unit
(Actuator powered through transformer and than 24V AC/DC Smoke detector).
• BSD24T or GSD24T (Only for Grille types 11 and 22)
Overflow fire damper with Smoke Detector fitted activation mechanism (24V AC/DC) with a Belimo or Gruner spring return actuator
with an electro-thermal fuse 72°C and auxiliary switches, with a Belimo supply and communication unit or Gruner power supply unit
(Actuator powered through 24V AC/DC Smoke detector).

Material Composition

The product contains galvanized sheet metal, calcium silicate board, graphite fire-proof laminate, polyurethane foam. These are
processed in accordance with local regulations. The product contains no hazardous substances.

«
...
2
3
4
5
6
...
»

Содержание F-B90






































































Отзывы:

Нет отзывов

Похожие инструкции для F-B90

Бренд: EWC Controls Страницы: 4

Бренд: AEROPRODUKT Страницы: 21

Бренд: Zonefirst Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды