background image

Packaging and transport

8.1  Packaging the device

The packaging protects the contents from damage or other deleterious

effects that could adversely affect their quality.

Retain the original packaging so that it can be reused for

storage,

transport and

return for disposal

as and when necessary.
If you fail to do this it will no longer be possible to guarantee

protection from damage or other harmful influences.

8.2  Transporting the device

NOTICE!
Material damage caused by inappropriate transport.
Inappropriate transport may damage the device.
– Pay attention to the handling symbols on the trans-

port packaging.

– Comply with the stated transport requirements (see

Ä

 “Transport requirements”  on page 37

).

When transporting the device you should comply with the following

requirements:

n

Always shield the equipment from solar radiation.

n

Avoid mechanical vibration and shocks.

n

Avoid extreme temperature fluctuations.

n

Pay attention to the information in the “Technical data” section.

When the consignment is delivered, immediately check it for

possible transport damage and deal appropriately with any

detected transport damage or non-obvious defects.

Transport requirements

Packaging and transport

Transporting the device

WAVE 224 monitor/thin client - Industrial monitor/thin client

 

 37

Содержание WAVE 224










































Отзывы: