Systec & Solutions PILOT 217, Инструкция по эксплуатации

Страница: 29 / 41

n
SCOPE
This customer information applies to the following devices manu-
factured by Systec & Solutions GmbH:
– CONTROL 217 | 218 | 219 | 224 | 232
– PILOT 215 | 217 | 218 | 219 | 221
– SLICE 219 | 226
– WAVE 219 | 221 | 224 | 232
n
PURPOSE
This document serves to inform customers about product attrib-
utes. The information is provided by the manufacturer or supplier.
The information and recommendations it contains are made to the
best of our knowledge and belief. Users should carry out their own
investigations to establish usage and application recommenda-
tions relating to products’ suitability for their particular purpose.
KI-0002-DE.11 · Version dated: 07.2013
Systec & Solutions GmbH
Emmy-Noether-Straße 17 | 76131 Karlsruhe | Germany
Phone +49 721 6634 400 | Fax +49 721 6634 444
talk@systec-solutions.com | www.systec-solutions.com
5.5 Using the optional USB connection
Unscrew and remove the dummy plug on the left-hand side of
the PILOT 217 monitor/thin client.
ð
The optional USB connection is now accessible.
When closing the USB connection, make sure it is
screwed tight, otherwise the IP65 protection level can
no longer be guaranteed.
Firmly screw the dummy plug into place on the left-hand side of
the PILOT 217 monitor/thin client.
ð
The optional USB connection is firmly screwed shut.
5.6 Setting up the WLAN (optional)
The WLAN antenna together with the WLAN USB stick are
located in the equipment rack adapter.
The WLAN USB stick may be connected only directly to a USB
interface with no interposed USB hub.
Opening dummy plugs
Closing dummy plugs
Operation
Setting up the WLAN (optional)
PILOT 217 monitor/thin client - Industrial monitor/thin client 29