syslogic IPC/NETIPCFW-1A, Пользовательская документация

Страница: 29 / 45

IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
Code BIOS POST Progress
49H finding high memory size from patterns
4aH check ROM BIOS data area again
4bH check for <DEL>, clear low mem for soft reset
4cH clearing ext mem for soft reset
4dH saving memory size
4eH on cold boot, display 1st 64KB memtest
4fH on cold boot, test all of low memory
50H adjust memsize for 1K usage
51H on cold boot, test high memory
52H prepare for shutdown to real-mode
53H saved regs & memsize, entering real-mode
54H shutdown successful, restoring codepath
55H disabling A20 line
56H checking ROM BIOS data area again
57H checking ROM BIOS data area some more
58H clear the "Hit <DEL>" message
59H test DMA page register
60H verify from display memory (???)
61H test DMA0 base register
62H test DMA1 base register
63H checking ROM BIOS data area again
64H checking ROM BIOS data area some more
65H programming DMA ctrllrs 0 & 1
66H initializing INT ctrllrs 0 & 1
67H starting keyboard test
80H issuing reset cmd & clring output buffer
81H check for stuck keys & issue test cmd
82H initializing circular buffer
83H check for locked keys
84H check for memsize mismatch (CMOS/BIOSDATA)
85H check for pswd or bypass setup
86H pswd checked. do pgming before setup
87H call the setup module
88H back from setup, clr screen
89H display power-on screen message
8aH display "Wait..." message
8bH do system & video BIOS shadowing
8cH load standard setup params into BIOSDATA
8dH check and initialize mouse
8eH check floppy disks
8fH configure floppy drives
90H check hard disks
91H configure IDE drives
92H checking ROM BIOS data area again
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch
29
/
45