IPC/NETIPCFW-1A: User Documentation
DOC/NETIPCFW-E; V3.0
Note:
this image must be located at address 3
e
00000h in the target and the BIOS must be
configured for a 1.44 MByte ROM-Drive.
The binary image is generated using a DOS batch file 'MAKEDRV2.BAT' located in directory
C:\FBCUBE\NETIPCFW\EDOSROM (for Embedded DOS-ROM),
C:\FBCUBE\NETIPCFW\MSDOS (for MS-DOS) and C:\FBCUBE\NETIPCFW\NONDOSOS
(for non-DOS operating systems).
These batch files contain the following steps:
3. First an empty diskette image is created with the maximum allowable size (e.g.
1.44 MBytes).
4. Secondly the system files, utilities and predefined application programs are
copied into the disk image using a disk imaging tool located in directory
C:\FBCUBE\NETIPCFW\UTIL
To make the ROM-Disk image, please proceed as follows:
5. Edit the command file MAKEDRV2.BAT to include your applications programs.
Note:
in the command file delivered, the monitor program CUBMON.EXE is
included. CUBMON is part of the CUB/IOCOMSW-1A software package which
must be installed before using MAKEDRV2.BAT in order to use the program.
CUBMON.EXE may be deleted from the MAKEDRV2.BAT if not required.
WARNING
: do not delete the DOS.SYS, IO.SYS, MSDOS.SYS,
COMMAND.COM, CONFIG.SYS and AUTOEXEC.BAT entries from
MAKEDRV2.BAT!
6. Save MAKEDRV2.BAT
7. Start MAKEDRV2.BAT (Enter
C:\FBCUBE\NETIPCFW\EDOSROM>MAKEDRV2
8. Note that no error messages are allowed during the process of ROM-drive image
generation (please observe the running output on your screen carefully).
© Syslogic Datentechnik AG, CH-5400 Baden, Switzerland, http://www.syslogic.ch
18
/
45
