Synway Information Engineering Co., Ltd
Figure 2-11 Rear Panels Associated with Outlet Boards
Notes:
①
Both RSD081 and RSD043 outlet boards are full-length, while RSD082 and
RSD042 outlet boards are half-length.
②
All kinds of rear panels are made of metal and with U-shaped cross sections.
③
The RSD081 rear panel can work only with the RSD081 outlet board.
④
The RSD043 rear panel can work only with the RSD043 outlet board.
⑤
The RSD042 and RCU&RSD082 rear panels can work only with half-length outlet
boards.
Remarks:
①
Here above illustrates the hardware structure of the Synway TEJ digital trunk interface
boards which are used exclusively for Synway intelligent switch. Always check the label
on the back of a board to get the exact board model.
②
See
LED
Lamp Status
Implication
ON
synchronous
Flash asynchronous
Green Lamps
OFF
idle port
Table 2-1
below for detailed information about the synchronization indicators of on-board
trunk interfaces mentioned above.
RSD081 Rear Panel
RSD042 Rear Panel
RCU&RSD082
Composite Rear Panel
RSD043 Rear Panel
IN
OUT
IN
OUT
IN
OUT
IN
OUT
4
3
2
1
4
3
2
1
8
7
6
5
MIC
SPK
PWR
1
2
3
4
4
3
2
1
Special-for-Switch TEJ Digital Trunk Interface Boards Hardware Manual
(Ver 1.0) Page 10
