Synway Information Engineering Co., Ltd
UMCT Intelligent Switch Hardware Manual
(Ver. 1.3)
Page 9
Figure 2-3 Guide Rails for Functional Boards
Figure 2-4 Board Insertion
Smoothly insert the functional board to the guide rails as shown in Figure 2-4. With the board
completely inserted, push the upper and bottom handles inwards at the same time until a
‘click’
sound is heard. The board is now properly fitted.
Note: The board can be further fastened with screws on the handle for extended use and
prevention of accidental removal. See Figure 2-4 above.
To pull the board out, first loosen off the screws on the panel and press both red buttons on the
board handle at the same time. Wait until the board breaks away from the locking hole on the
chassis and draw it horizontally out.
Step3: Install the outlet board.
Remove the baffle for outlet board as shown in Figure 2-2 before installing the outlet board. Then
you will see guide rails on both sides and slots on the outlet board. See Figure 2-5 below.
Figure 2-5 Rear Panel
Smoothly insert the outlet board to the guide rails.
Guide Rail1
Guide Rail 2
Slot on Outlet Board
Guide Rails
On-board Slots
Screw here to fix the functional board