Synway SMG-D Series, Руководство пользователя

Страница: 50 / 70

Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0) Page 45
Note: “[*]” represents TFM symbol *, while “*” represents any string.
Route by Number
When this feature is enabled, the gateway will route a call from IP to a
corresponding port based on its number. And the number of the port which this call
will be routed to can be set via the item SIP Account on the FXS or FXO Settings
interface. In such case, the configuration item Call Destination goes invalid and
shows Route by Number on the routing rule configuration interface. The default
setting is disabled .
Call Destination Port group to which the call will be routed.
After configuration, click Save to save the settings into the gateway or click Close to cancel the
settings.
See Figure 3-13 for the IP  Tel routing rule configuration interface after your configuration. There
is a rule displayed with Index 63 and Call Destination „Route by Number‟, having no restriction on
Source IP, CallerID Prefix and CalleeID Prefix, which indicates the gateway will route a call from
any IP address to a corresponding port based on its number.
Press the Add New button on the bottom right corner of the list to add a new routing rule.
Figure 3-13 IP  Tel Routing Rule Configuration Interface
Click Modify in Figure 3-13 to modify a routing rule. The configuration items on the IP  Tel routing
rule modification interface are the same as those on the Add New Routing Rule (IP  Tel)
interface. Note that the item Index cannot be modified.
To delete a routing rule, check the checkbox before the corresponding index in Figure 3-13 and
click the
Delete button. Check All means to select all available items on the current page;
Uncheck All means to cancel all selections on the current page; Inverse means to uncheck the
selected items and check the unselected. To clear all routing rules at a time, click the Clear All
button in Figure 3-13.
Under the Character mode, you can edit the routing rule list to add a new one or modify an old one.
The exact meaning of each element of the rule is described on the page.
3.8.3 Tel to IP
Figure 3-14 Tel  IP Routing Rule Configuration Interface (Standard)
See Figure 3-14 for the Tel  IP routing rule configuration interface. By default, there is no