Synway SMG-D Series, Руководство пользователя

Страница: 34 / 70

Synway Information Engineering Co., Ltd
SMG-D Series Analog Gateway User Manual (Version 2.0.0) Page 29
85 80[1-9]xxxxx
Any 8-digit number starting with 801, 802,
803, 804, 805,.806, 807, 808 or 809
84 800xxxxxxx Any 10-digit number starting with 800
83 4[1-9]xxxxxx
Any 8-digit number starting with 41, 42,
43, 44, 45, 46, 47, 48 or 49.
82 40[1-9]xxxxx
Any 8-digit number starting with 401, 402,
403, 404, 405, 406, 407, 408 or 409
81 400xxxxxxx Any 10-digit number starting with 400
After configuration, click Save to save the above settings into the gateway or click Close to cancel
the settings.
Click Modify in Figure 3-5 to modify the dialing rules. The configuration items on the dialing rule
modification interface are the same as those on the Add New Dialing Rule interface.
To delete a dialing rule, check the checkbox before the corresponding index in Figure 3-5 and
click the „
Delete ‟ button. Check All means to select all available items on the current page;
Uncheck All means to cancel all selections on the current page; Inverse means to uncheck the
selected items and check the unselected. To clear all dialing rules at a time, click the Clear All
button in Figure 3-5.
Under the Character mode, you can edit the dialing rule list to add a new one or modify an old one.
The exact meaning of each rule element is described on the page.
3.5.10 Dialing Timeout
The table below explains the items shown on the dialing timeout info interface.
Item Description
Inter Digit Timeout
Sets the largest interval between two digits of a dialing number. Range of value:
1~30, calculated by s, with the default value of 6. In case your dialing rules do not
include “ . ”, the call will fail if there is no digit dialed or no dialing rule matched during
this interval; in case your dialing rules include “ . ”, the gateway will wait until this
interval ends and match to the dialing rule “ . ” if there is no digit dialed or no other
dialing rule matched during this interval.
Off-hook Waiting
Keypress Timeout
Sets the maximum time to wait for keypress after the FXS port picks up the phone.
The value range is 1~30, in seconds, and the default value is 6.
Description
More information about the configuration item Inter Digit Timeout , such as the
reason for adopting the current value.
Click Modify on the interface to modify the dialing timeout info. The configuration items on the
dialing timeout info modification interface are the same as those on the Dialing Timeout Info
Interface .
After configuration, click Save to save the above settings into the gateway or click Close to cancel
the settings.
3.5.11 Cue Tone
The table below explains the items on the Cue Tone interface.
Item Description
Upload a file of cue Uploads a user-defined cue tone file to the gateway.