Synway Information Engineering Co., Ltd
SMG-C Series Analog Gateway User Manual (Version 1.7.1)
Page 72
You can edit the routing rule list to add a new one or modify an old one. The exact meaning of
each element of the rule is described on the page.
Figure 3-70 IP
Tel Routing Rule Configuration Interface (Character)
3.7.3 Tel to IP
Figure 3-71 Tel
IP Routing Rule Configuration Interface (Standard)
See Figure 3-71 for the Tel
IP routing rule configuration interface. By default, there is no
available routing rule on the gateway. The Tel
IP routing rule configuration has two modes:
Standard and Character.
Under the Standard mode, click
Add New
to add them manually. See Figure 3-72. You may use
the default values of all the configuration items herein except for
Destination IP
and
Destination
Port
.