Synway SMG-C Series Скачать руководство пользователя страница 78

Страница: 78 / 111

Synway Information Engineering Co., Ltd

SMG-C Series Analog Gateway User Manual (Version 1.7.1)

Page 73

Figure 3-72 Add New Routing Rule (Tel



IP)

The table below explains the items shown in the above figure.

Item

Description

Index

The unique index of each routing rule, which denotes its priority. A routing rule with a

smaller index value has a higher priority. If a call matches several routing rules, it will be

processed according to the one with the highest priority.

Description

More information about each routing rule, with the default value of

default.

Source Port Group

(Call Initiator)

Port group from which the call is initiated. This item can be set to a specific port group or

‘*’ which indicates any port group.

CallerID Prefix,

CalleeID Prefix

A string of characters at the beginning of the caller/called party number. It can be a

specific string consisting of digits 0~9, ”[*]”, ”#" or characters ranges defined by [ ]. ‘[ ]’

represents a character within the range it defines. Values in [ ] only can be digits

‘0~9’, ”[*]”, ”#", punctuations ‘

‘ and ‘

’. (’

’ is used between two characters to indicates any

characters between these two characters. ’

’ is used to separate characters or characters

ranges, representing alternatives.) For example, 057[1-3,6] represents the string 0571,

0572, 0573 or 0576. Also these items can be set to “*” which indicates any string. These

two configuration items together with

Source Port Group (Call Initiator)

specify a

routing rule for calls.

Note:

”[*]” represents DTFM symbol *, while “*” represents any string.

Destination IP,

Destination Port

IP address and port number of the remote end to which the call will be routed.

After configuration, click

Save

to save the settings into the gateway or click

Close

to cancel the

settings.

Содержание SMG-C Series
















































































































Результаты поиска

Содержание SMG-C Series

Отзывы:

Synway SMG-C Series, Руководство пользователя, Страница: 78 / 111

Результаты поиска

Содержание SMG-C Series

Отзывы: