Synway Information Engineering Co., Ltd
Figure 2-14 Fit HD Power Plug to Backboard
Note:
1) Skip this step if you do not use any daughterboard.
2) You may choose a suitable backboard according to how many daughterboards
you need. See Table 2-1 to find the backboard models we supply.
Step 6: Set up an application environment
Connect phone lines with the port to an FXO module and the telephone with the port to an
FXS module, to establish an application environment.
Step 7: Connect the clock synchronization line
Note: Skip this step if there is no need to get clock synchronization for multiple boards.
The clock synchronization line is used to connect more than one FXM32 motherboards or
connect FXM32 boards with other kinds of boards (e.g. digital trunk boards) so that these
boards can use a same clock to reduce the errors in faxing and to ensure the accuracy of data
transmission between different boards. (Note: The synchronization of FXM32 motherboards
and daughterboards is achieved by backboards instead of the clock synchronization line.)
See Figure 2-15 below.
Figure 2-15 Clock Synchronization Line
See Figure 2-2 for the clock synchronization line interface on the motherboard.
Step 8: Boot your computer and install the driver
Regarding driver installation, refer to the file ‘SynAST UserManual.doc’ for details.
Synway FXM32 Analog Voice Board Hardware Manual (Version 1.0)
Page 13