Synway Information Engineering Co., Ltd
Figure 2-7 Modules and RJ11 Jacks
Note:
1) What each RJ11 jack corresponds to is the module position but not the module type. For
example, as shown in Figure 2-7 above, Port 1 and Port 2 are connected to Module 1, no
matter Module 1 is FXO, FXS or FXC. Likewise, Port 3 and Port 4 correspond to Module
2.
2) Interfaces and modules for daughterboards are the same as those on the motherboard.
3) When an FXM32 board is running, the indicators at the RJ11 jacks corresponding to trunk
channels stay red, and those at the RJ11 jacks corresponding to station channels stay
green. The indicators being unused will not light up. Take the board in Figure 2-7 for
example, the color of indicators at each interface are as shown in Figure 2-8 below.
Port1
Port2
Port3
Port4
模块
1
模块
2
Figure 2-8 Color of Indicators
Illustrations (a), (b), (c) and (d) in Figure 2-9 below respectively show how the indicators at RJ11
jacks work with different kind of modules (FXO, FXS or FXC) or with different number of modules
on the board.
Synway FXM32 Analog Voice Board Hardware Manual (Version 1.0)
Page 8