RJ11
DVD Interface
Power Interface
Grouding Stud
Network Interface
SD Card Interface
Console
Reset Button
Figure 1-3 Rear Panel
1.4 Button Operation
The recording Server is equipped with configuration buttons and OLED display through which
users can query the operating status and configure the IP address. The button operations are
demonstrated in Figure 1-4 below.
图例：
+/-
OK
ESC
Figure 1-4 Button Operation
Note:
1. The images in the flow chart are the actual interfaces on the OLED display. The arrows and
corresponding legends indicate the button presses and directions. For exact location of the
buttons on the panel, refer to
.
2. The word ‘Working’ in the main interface
shall be ‘Booting’ instead during the
starting process.
3. In the channel state interface
, CH represents channel number while ST indicates
state. The abbreviations and corresponding meanings of the channel states are: ID (Idle), OF
(Offline), RI (Ringing) and PI (Pickup).
4. In the IP configuration interface
, users can modify the IP address. The flashing
field in the interface is the current field to be set. Use the ‘+/-’ button to modify it. Press the
“OK” button to go to the next field. After all fields are configured, press “ESC” button to save
the settings and return to the main IP configuration interface.
ATP2410 User Manual (Version 4.0.0.0)
Page 4
