SYNTHESIS TECHNOLOGY
PAGE
13
MOTM-650 USER’S GUIDE
WWW.SYNTHTECH.COM
Ext.Reg.
External Regular
syncs the arpeggiators to the rising edge of CV pulses on the
EXT CLK
input. This option requires a regular pulse for best results when
MIDI Clock Transmit
is
enabled, or when using a
Clock Divisor / Multiplier
setting other than
X1
. When the
clock pulse stops, the 650 will generate an internal clock at the last tempo received, just as
it does with the
MIDI Clock
setting.
Ext.
Irr.
External Irregular
also syncs the arpeggiators to the rising edge of CV pulses on the
EXT
CLK
input, but it does not allow the additional clocking features that the other clock sources
do. It plays one note per clock pulse, and is best used when the clock source is irregular.
M
ID
I
Clk
Transmit
The
MIDI Clock Output
setting is only displayed when the
Clock Source
is set to
Internal
, or to
External Regular
.
Transmit
The
Transmit
option turns MIDI clock transmission on whenever one of the arpeggiators
is enabled. Whenever
Transmit
, selected, a Start command will be sent from the
MIDI OUT
and Clock commands will be sent regularly. This option is useful for synchronizing
sequencers and drum machines to the 650’s arpeggiators.
Off
The
Off
option disables MIDI clock transmission.
IClk
BPM
_
120.0
The
Internal Clock BPM
setting is only displayed when the
Clock Source
is set to
Internal
. It sets the tempo of the internal clock to one of 128 tempos, ranging from 60
beats per minute (BPM) to 238 beats per minute. At the middle of the range, the resolution
is .5 BPM; at the extremes it is 2 BPM.
