28
drive, select the setting
CDROM
. If you have an ATAPI device with removable
media (e.g. a ZIP drive or an LS-120) select
Floptical
.
Advanced CMOS Setup
The Advanced CMOS setup is used to control advanced system information
such as hardware access and boot settings.
Quick Boot (Enabled)
If you enable this item, the system starts up more quickly be elimination some
of the power on test routines.
1
st
Boot Device/2
nd
Boot Device/3
rd
Boot Device
Use these items to determine the device order the computer uses to look for
an operating system to load at start-up time.
Try Other Boot Devices (Yes)
If you enable this item, the system will also search for other boot devices if it
fails to find an operating system from the first two locations.
Initial Display Mode (BIOS)
This option specifies the initial display mode when the system boots.
S.M.A.R.T for Hard Disks (Disabled)
Set this option to Enabled to permit the BIOS to use the SMART (System
Management and Reporting Technologies) protocol for reporting server
system information over a network. Enabling this feature allows you to back
up your data when your hard disk is about to fail. If a password has been set
for the supervisor, this item will not be visible for the user.
BootUp Num-Lock (On)
Set this option to Off to turn the Num Lock key off when the computer is
booted you can use the arrow keys in both the numeric keypad and the
keyboard.
