Syntax Olevia LT23HVX, Руководство пользователя

Страница: 38 / 41

Troubleshooting
If you are still experiencing some difficulties with the TV Setup, please refer to the following suggested
solutions for common problems and symptoms.
Power On failed
No picture or sound
Full of spots or noise on the screen
Poor color display
Image distortion
The image is blue
The image is too bright, and the
image is saturated in the brightest
areas.
The screen shows searching for
signal but no image.
Out of range
Remote control does not work
Stripes on the screen
Power plug is not securely inserted into the socket.
1. Check LCD TV power status.
2. Check if the terminal is properly connected and the input mode has a
right connection.
3. Check if the cable is well connected between the video source and
the TV.
Check if any interference from automobiles, trains, high-voltage
transmission lines, neon signs or other potential sources of interference.
Check OSD and adjust in "Picture" function.
Check aspect ratio in "Screen" function.
Check the setting of source in the TV and set it in the right type.
1. Check if the contrast setting is too high.
2. The DVD player is set for a high-level output.
1. Check if the signal cable is disconnected.
2. Check if the terminal is properly connected and the input mode has a
right connection.
Check if input signal is suitable to the display.
1. Check if the batteries are properly installed.
2. Check if the batteries are out of power.
3. Check both distance and angle from the TV's infrared (IR receiver) to
remote control.
4.Check if any object is in between remote control and IR receiver.
5.Check if the IR is under strong fluorescent lighting.
Any antenna from a radio or cell phone may cause interference.
Keep display away from these types of devices.
Problem
Possible Solution
36