manualshive.com logo in svg

Synrad p250, Руководство пользователя, Страница: 9 / 106

Поделиться
Скачать
Synrad p250 Скачать руководство пользователя страница 9

WARRANTY INFORMATION

 

PAGE 

|

 9 

Warranty Information 

This is to certify that p250 lasers are guaranteed by NOVANTA© to be free of all defects in materials and 
workmanship for a period of two years from the date of shipment. This warranty does not apply to any 
defect caused by negligence, misuse (including environmental factors), accident, alteration, or improper 
maintenance. This includes, but is not limited to, damage due to corrosion, condensation, or failing to 
supply properly conditioned purge gas. 

We request that you examine each shipment within 10 days of receipt and inform NOVANTA of any 
shortage or damage. If no discrepancies are reported, NOVANTA shall assume the shipment was 
delivered complete and defect-free. 

If, within two years from the date of shipment, any part of the p250 laser should fail to operate, contact 
the NOVANTA Customer Service department at 1.800.NOVANTA1 (outside the U.S. call 1.425.349.3500) 
and report the problem. When calling for support, please be prepared to provide the date of shipment, 
model number and serial number of the unit, and a brief description of the problem. When returning a 
unit for service, a Return Authorization (RA) number is required; this number must be clearly marked on 
the outside of the shipping container in order for the unit to be properly processed. If replacement parts 
are sent to you, then you are required to send the failed parts back to NOVANTA for evaluation unless 
otherwise instructed.  

If your p250 laser fails within the first 45 days after shipment, NOVANTA will pay all ship-ping charges to 
and from NOVANTA when shipped as specified by NOVANTA Customer Service. After the first 45 days, 
NOVANTA will continue to pay for the costs of shipping the repaired unit or replacement parts back to 
the customer from NOVANTA. The customer, however, will be responsible for shipping charges incurred 
when sending the failed unit or parts back to NOVANTA or a NOVANTA Authorized Distributor. In order 
to maintain your product warranty and to ensure the safe and efficient operation of your p250 laser, only 
authorized NOVANTA replacement parts can be used. This warranty is void if any parts other than those 
provided by NOVANTA are used. 

NOVANTA and NOVANTA Authorized Distributors have the sole authority to make warranty statements 
regarding NOVANTA products. NOVANTA and its Authorized Distributors neither assumes nor 
authorizes any representative or other person to assume for us any other warranties in connection with 
the sale, service, or shipment of our products. NOVANTA reserves the right to make changes and 
improvements in the design of our products at any time without incurring any obligation to make 
equivalent changes in products previously manufactured or shipped. Buyer agrees to hold NOVANTA 
harmless from any and all damages, costs, and expenses relating to any claim arising from the design, 
manufacture, or use of the product, or arising from a claim that such product furnished buyer by 
NOVANTA, or the use thereof, infringes upon any Patent, foreign or domestic. 

 

 

 

Содержание p250











































































































Отзывы:

Нет отзывов