Synrad p250 Скачать руководство пользователя страница 14

Страница: 14 / 106

NOMENCLATURE

PAGE

Nomenclature

The nomenclature section includes:

•

Model numbers

•

Laser versions

The first three characters designate the Model Series, second three characters indicate the power option,

the next character signifies the safety option which is an “S” (Standard) for OEM models. The next

character indicates the model revision or laser build and the last three characters indicate the beam

options where 10.6 is 10.6um.
Refer to the following figure for further examples.

Laser versions

p250 lasers are divided into two distinct functional categories: Keyswitch and OEM models. In addition

to a manual Keyswitch for resetting faults, all Keyswitch-equipped lasers incorporate a manual shutter

switch to block the laser’s output aperture as an added safety measure.
NOVANTA

OEM lasers are primarily designed as components for integration into larger processing

systems by the Original Equipment Manufacturer (OEM) or System Integrator who bears the

responsibility for meeting the appropriate laser safety requirements for Class 4 laser systems.
p250 lasers are currently available only as OEM lasers; however, they do include an EM shutter assembly.

Caution: Possible Equipment Damage

Do not use more than one fastener per foot, otherwise damage to your laser will occur!

Содержание p250











































































































Результаты поиска

Содержание p250

Отзывы:

Synrad p250, Руководство пользователя, Страница: 14 / 106

Результаты поиска

Содержание p250

Отзывы: