7
Chapter 2: Hardware Setup
For 2.5” drives:
Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive.
3
Insert the loaded drive tray into the empty hard drive bay.
Important:
Make sure the drive tray is completely inserted. Otherwise, the drive might not function properly.
4
Push the handle inward to secure the drive tray.
5
Repeat the steps above to install all prepared drives.
6
Drives are numbered as shown below.
Note:
If you want to create a RAID volume, we recommended all installed drives be the same size in order to
optimize drive capacity usage.
