Synology NAS SA3200D, Руководство по установке оборудования

Страница: 10 / 32

Tools and Parts for Component Installation
Please prepare tools and parts below before setting up your Synology NAS:
• A screwdriver.
• At least one 3.5” or 2.5” SAS drive (please visit
www.synology.com/compatibility for compatible drive
models).
Warning:
If you install a drive that contains data, the system will format the drive and erase all existing data.
Please back up any important data before installation.
• Rail mounting kit. (please see the Optional Accessories section to find out the suitable rail kit for cabinet
installation)
Warning:
We suggest mounting your Synology NAS on a cabinet before installing any drives since the heavy
weight will increase the installation difficulty.
Install Drives
Please follow steps below for drive installation:
1 Open the drive tray:
a Find the small button located on the left side of the drive tray handle. Press the button down, and the drive
tray handle will pop out.
b Pull the drive tray handle out as illustrated below.
2 Install drives:
•
For 3.5” drives: Place the drive in the drive tray. Turn the tray upside down and tighten screws into the four
spots indicated below to secure the drive.
Hardware Setup
10
2
Chapter