7
Chapter 2: Hardware Setup
For 2.5” drives:
Remove the fastening panels from the sides of the drive tray and store them in a safe
place. Place the drive in the blue area (shown below) of the drive tray. Turn the tray upside down and
tighten the screws to secure the drive in place.
4
Make sure the side marked with
"UP"
is facing up, and insert the drive tray into the empty drive bay. You
should hear a click when the tray is locked into place.
5
If you have prepared a second drive, repeat the steps above to install it.
6
Drives are numbered as shown below:
