6
Chapter
2
Chapter 2:
Hardware Setup
Tools and Parts for Drive Installation
A screwdriver (only for 2.5 drives)
At least one 3.5” or 2.5” SATA drive (please visitWarning:
If you install a drive that contains data, the system will format the drive and erase all existing data. Please
back up any important data before installation.
Install Drives
1
Remove the drive bay cover from the front panel.
2
Push the latch upward and pull the handle to remove the drive tray.
3
Load drives in the drive trays.
For 3.5” drives:
Remove the fastening panels from the sides of the drive tray. Place the drive in the drive
tray. Then insert the fastening panels to secure the drive in place.