14
Chapter 2: Hardware Setup
3
Remove the expansion slot shield:
a
Remove the screw that secures the adapter slot’s cover.
b
Remove the adapter slot’s cover.
4
Install the network interface card:
a
Align the card’s connectors with the adapter slot, and insert the card into the slot.
b
Use two fingers with firm, even pressure to push down on the card and the bracket.
5
Replace the top cover, and then replace and tighten the 6 screws you removed in Step 2.
Note:
Make sure the connectors are fully inserted. Otherwise, the network interface card might not be able to function
properly.
