SynJ SB67138 Скачать руководство пользователя

Страница: 92 / 116

All deleted

All old messages in the general mailbox are erased.

All devices
deregistered

The cordless handsets, desksets and cordless headset
deregistration was successful.

Aux In Device
Playing

Audio device connected with the telephone base is playing for
M.O.H. review.

Auto Attendant ON
Play announcement

Auto attendant is on and the selected announcement plays.

Busy

Failed intercom or conference call (there are already two cordless
handsets being used).

Call restricted

Your extension is in the restricted extension list and you are trying
to dial a number that starts with the restricted prefix.

Calling alert #

The alert call number is dialing out.

Calling
X:Deskset X

The telephone base is starting an intercom call with a deskset.

Calling
X:Handset X

The telephone base is starting an intercom call with a
cordless handset.

Call log empty

There are no entries in the caller ID history.

Cordless headset
registered

The cordless headset registration was successful.

COVM reset

COVM

feature is reset.

Deleted

A call log entry, a redial number or a directory entry was deleted.

Deregister all?

All registered devices will be deregistered from the telephone
base.

Deregistering

The telephone system is deregistering a device from the
telephone base.

Deskset registered

The deskset registration was successful.

Device connected to
the headset jack
will be used
for M.O.H.

Audio device connected to the

AUX IN

jack at the base is for

music on hold feature.

Directory empty

There are no directory entries.

Directory
No items stored

There is no directory entry when you press

DIR

for chain dialing.

Ended

You have just ended a call.

General Mbox ON
Play announcement

General mailbox is on and the selected announcement plays back.

Appendix

Telephone base display screen messages

Содержание SB67138





















































































































Результаты поиска

Содержание SB67138

Отзывы:

Похожие инструкции для SB67138

Бренды по названию

Популярные бренды

SynJ SB67138, Руководство пользователя

Результаты поиска

Содержание SB67138

Отзывы:

Похожие инструкции для SB67138

Бренды по названию

Популярные бренды