25
www.synexis.ca
+1 844-352-7680
Installation
Identify a suitable location for the unit
downstream from both the ‘A’ coil in the
supply plenum and from the air filter.
Use provided duct cutout template.
Trim off outer excess of the rectangle
leaving ‘Cut Out Area’ to be traced.
Apply the template to the section of
duct that is desired for the installation.
Trace the template with a marker and
remove the template.
Ensure that the bulb is centered with
respect to the Sail frame. Test fit the
device to make sure the Sail tray is not
obstructed.
Utilizing a step drill bit, drill a hole within
the area of the duct to be removed.
Remove the remaining section of sheet
metal from the ‘Cut Out Area’ using a
pair of tin snips.
AIRFLOW
