Synetik ErgoCare PIPER, Руководство пользователя

Страница: 22 / 22

21
- Regularly inspect locking devices, catches, footrest, joint strapping to ensure they are
secure and in full working order.
- Brakes, wheels, tires are subject to wear and should be replaced if necessary, by an
authorized repair person approved by the stroller supplier.
- We recommend that the stroller be checked by authorized repair person every 12 months.
- We recommend that after 24 months, visit an authorized service department
- If the stroller is damaged or in need of repair, the authorized repair person will be able to
advise on what is required.
- Alternatively, Synetik ErgoCare Customer Service Department is available for product
information.
- Only PATRON Bohemia a.s. replacement parts should be used on this stroller.
- Should parts of your stroller become stiff or difficult to operate (no later than every 6
months), ensure that dirt is not the cause, apply a light application of a spray lubricant e.g.
WD 40 (do not use oil or grease). Ensure that the lubricant penetrates between the
components but do not overspray as this may encourage the accumulation of dirt. Wipe off
any excess spray. Regular lubrication of moving parts will extend the life of your stroller
and make opening and folding the device easier.
- Make sure that you are familiar with the operation of the stroller. It should always open
and fold easily. If it does not, do not force it - stop and read the instructions.
- Wheels, plastic and metal parts may be wiped clean with warm water and mild detergent.
-
The seat fabric can be washed by hand (Max. 30 °C).
- Never clean with abrasive, ammonia-based, bleach-based or spirit-type cleaners.
- After exposure to damp conditions, dry off with a soft cloth and leave fully open in warm
environment.
-
Store your stroller in a safe, dry place.
- Check and tighten the screw connections regularly.
- If there are used control cables (brakes, telescopes, tilt), check it regularly and, if necessary,
oil them.
- Synetik ErgoCare reserves the right to make design changes to any of their products
without prior notice as a part of their continuous development program.