Synetik ErgoCare CORZINO, Руководство пользователя

Страница: 10 / 24

Adjustment
Before placing the child in the stroller, adjust the height of the backrest, the depth of the seat and
install the desired accessories.
** Use the hex key to handle the screws
1. Brakes
To engage the brake, press brake lever pad on both sides fully to the end position. To disengage
the parking brake, lift both brake lever pads.
2. Five-point Belt
4.1 Release all plastic quick fasteners (fork type).
4.2 Place the child into the stroller and adjust the belt to desired lengths.
4.3 Choose the hole in backrest (5) to adjust the proper position of the shoulder straps. The
hole should be level with or higher than the top of the shoulders.
4.4 The shoulder straps must be mounted onto the backrest and backrest extension at once –
Size 38 and 42 only
3.
Seat Reinforcement
You can increase or decrease the seat tension by adjusting the seat frame:
5.1 Extend the seat reinforcement straps to reduce tension.
5.2 Shorten the seat reinforcement straps to increase tension.
5.3 Never change the width of the seat by adjusting the seat tension.
6. Backrest Angle Adjustment
6.1 Loosen and remove the two screws that are located on each side of the seat frame (8) by
using 2 wrenches (see image)
6.2 Gently move the seat up or down so that the screws can run in the other hole (see image)
6.3 Insure that the seat is parallel to the ground and tighten the two screws by using 2
wrenches
9