SYNETICA enLink Zone
Quick Start Guide Rev 1.4
Live Menu
enLink Zone incorporates a live data screen which shows all readings and device status for easy data validation. To enter
the Live status screen, from the
Main Menu
enter
c
for Configure Device followed by
d
for Live readings display. A screen
similar to the one below will show. The sensors will vary according to the enLink Zone model and the installed sensors.
Live Display
Configuration Menu
The enLink Zone configuration menu allows you to view current sensor readings and also to change various functions of
their behaviour such as calibration data. To enter the Configure Device menu press
c
from the main menu. A screen
similar to the one below will show. The exact parameters shown will vary according to the Zone model and sensors fitted.
CO
2
Sensor Auto Calibration Configuration
To view and set CO
2
sensor calibration information, enter
c
and the screen below will show.
