Synergy Global Technology InfraPower IPM-01, Руководство пользователя

Страница: 10 / 36

Part II. IP Configuration and Software
< 2.1 > IP dongle configuration
P.5
1. Prepare a notebook computer to download the IP setup utilities from the link :
http://www.rackmountmart.com/support/utilities/infrapower/IPdongleSetup.msi
2. Double click the IPDongleSetup.msi and follow the instruction to complete the installation.
3. Go to each first level PDU with the notebook computer & a piece of
CAT. 5 / 6 cable
to configure the IP dongle by IP
setup utilities as below. Please take the procedure for all IP dongles ONE BY ONE .
After the completion of IP dongle connection, please take the following steps to configure the IP dongle :
IP dongle on 1st level PDU
To IP dongle
LAN port
To notebook computer
LAN port
CAT. 5 / 6 cable
4. Click
Scan
to search the connected IP dongles
5. Enter the device name in the name field ( min. 4 char. / max. 16 char. ). The default is Name.
6. Enter the location in the location field ( min. 4 char. / max. 16 char. ).
The default is Rack_001.
7. Enter the password in the password field for authentication ( min. 8 char. / max. 16 char. ). The default is 00000000.
8. Enter the new password in the new password field ( min. 8 char. / max. 16 char. ).
9. Re-enter the new password in the Confirm new password field.
10. Change the desired IP address / Subnet mask / Gateway, then click
Save
to confirm the setting to IP dongle.
11. The default IP address is as below:
IP address :
192.168.0.1
Subnet mask : 255.255.255.0
Gateway : 192.168.0.254
Reconnect the IP dongle with the network device
( router or hub ), after finish IP dongle configuration.
Ensure the PDU in
power ON status
Write down the new IP address & password
for < Setup > purpose, refer to P.12