Synel SY-760, Руководство пользователя

Страница: 56 / 106

-
54
8. You receive a NO PROG display.
The terminal then will be in the Technician mode.
The message on the display will alternate between
TECHNICIAN MODE
and the date and time in the following
format: DD/DW hh:mm:ss where DW represents the day of the week.
If you make an error during steps 3 through 6, the terminal will revert to the state just prior to step
3. If you are unable to complete this operation, exit the technician mode by pressing twice the Enter
key. Then begin again.
On exiting Technician mode, all of the settings are saved into the terminals Flash protected memory.
In case of memory crash the terminal reloads the settings from the flash memory (does not revert to
the factory default), which enables quick communication after formatting the memory.
You can refer to Setting up the Terminal (Technician Mode) for more information about the
Technician mode