Low Rise 3D extensions are designed to work with Shimano SW-R9160 and SRAM eTap CLICS. As such, Low Rise 3D extensions are free of
cable entry ports. The laser etched DO NOT CUT sections of the extension tubes are required for:
1)
Clamping within the EVO clamps (clamp end of extensions)
2)
Internal clamping (expansion) of the Shimano shifters (grip end of extensions)
It is inevitable that tube cutting will be required to achieve the combination of height and length that you require. When cutting, ensure
that the tube ends are cut at 90 degrees. Ensure that the extensions are properly deburred before inserting into the extension clamps.
Inappropriate tube preparation may lead to damage of the clamp bores and may obstruct tube insertion.
WARNING:
Ensure you do not crush tubes during clamping and cutting. The tight tolerances on EVO Extension Clamps require a round tube for insertion.
WARNING:
Low Rise 3D extensions are designed to work with Shimano SW-R9160 and SRAM eTap CLICS only. Any modification for other shifters voids the
product warranty. Sync Ergonomics is not liable for product damage and/or personal injury resulting from product modification.
