Synca JP-970, Руководство пользователя

Страница: 15 / 60

Remote control
stand
Arm unit
(L)
Figure: back side of arm unit (L).
Dent
Fixing
screws
Rear
side
Front
side
Loosen
Fixing
screws
Insert
Dent
Tighten
Mounting screws
for arm part
(Longer one)
Mounting
screws
Air joint
× 4
(2 pcs each for left
and right side.)
Mounting
part of
arm unit.
Mounting
part of main
body side.
Loosen 2 fixing screws in the back of arm unit a bit.
Insert the remote control stand into the dent of
armrest side and insert the remote stand into
where it's done in the first procedure (1.)
How to attach the remote stand.
(It is attachable both left and right side.)
How to attach the arm part.
(both left and right side.)
Pay attention not to damage the armrest when
inset the remote control stand.
Tighten the fixing screws and secure the remote
control stand and arm part.
Secure them firmly.
Insert the mounting part of arm unit into the mounting
part of main body side.
Fix the mounting screws by
hex wrench.
If it is not attached firmly, arm part
fall down and it may cause injury or
damage.
Attach the air joint of main body and arm
unit.
Insert them firmly.
If it is not attached firmly, air leakage may happen
and it may cause injury or damage.
Remote control stand may come off and it may cause injury
or damage.