Synca EZ DAM, Инструкция по эксплуатации

Страница: 10 / 12

10
When inserting make sure to clear the
upper and lower distal molar area for
proper throat packing.
8
OPTION: Installing the T-connector
If you would like to install the EZ DAM ® system permanently in your operatory,
use the T-connector to split the HVAC hose.
1. Make sure your hi-vacuum unit is
turned off.
2. Cut your hi-vacuum suction hose
approximately 4” below where it
connects to your equipment tray.
Apply lubricant on ends “A” and
“B” of T-connector & slide the ends
of the cut hose as shown in the
picture below.
3. Unplug* the white HVE adaptor
from your 6’ EZ DAM
® suction
hose and attach that hose to “C”
of the T-connector. (Store HVE
adaptor in a safe place for future
use, if needed.)
*An alternative option is to cut a small
section (1/2”) of the 6’ suction hose
where the HVE adaptor is connected if
you have trouble removing it manually.
A
B
C