SimplySNAP
Continued
SimplySNAP Quick Install Guide
Page 3
When this password is entered a connection is established and will appear in your network settings
similar to what is shown below. This may appear as an “Unidentified network” with no Internet
access. Now launch the Chrome browser and enter
HTTPS://192.168.55.1 in the address bar. Make sure it is
entered exactly as shown. (This is a secure connection to
a specific IP address that is the factory default within the
site controller). This connection mimics a connection to
an internet access point.
If you receive a warning as shown at right, click the Advanced
link at the bottom, then click the Proceed to 192.165.55.1
(unsafe)” link. (This warning is displayed because the site
controller is using an unsigned security certificate.)
The SimplySNAP dashboard should now appear in your
browser presenting you with the login screen to log in to the
SimplySNAP server.
Enter the following username and password:
Username:
snap
Password:
qwerty
When you log in, the dashboard of SimplySNAP will
be displayed as shown at right.
The SS420 site controller may also be connected
to a wired LAN network and accessed via the LAN.
The LAN must be configured with a DHCP server to
provide an IP address to the site controller when it
is connected. To use this method of connection, you
must retrieve the IP address that the DHCP server provided to the site controller.