9
THD-2850/2860/2880
5. Date, Time: When select “OFF” in GMT Usage,
Date and Time two items take effect, while
GMT Usage turns grey. Use numeric keys to
input the desired value.5. After setting, press
MENU key or EXIT key to exit and save. If the
value is invalid, system will inform “Invalid input!
Continue to edit?”. Press OK key at the Yes
button to continue the modifi cation, or press OK
key at the No button to exit without saving.
4.3.4 Timer Setting
If there is no program, you can not enter into this
window. There are 8 timers that can be set. Select
Timer up or down, and press OK key to enter into the
setting window.
1. Timer mode: The default mode is off. You can set
the timer once, daily and Off.
2. Wakeup Channel: Select the channel.
3. Wakeup Date, Time: Use numeric keys to input
the valid date.
Duration: Set the gap time. After waking up,
system will power off automatically after the
duration time.
Press MENU or EXIT key to save and exit.
4.3.5 Parental Lock
Before entering into the Parental Lock window, you
need input the correct password. The default
password is 0000.
1. Menu Lock: Press
keys to select
between Off and On. If select “On” , you can not
enter into the most sub-menu before entering
the password.
2. Channel Lock: Press
keys to select
between Off and On. The default value is Off.
If select “On”, you can not view the locked
channel set in Chanel List Edit window until you
input the correct password.
3. New Password: User numeric key (0-9) to input
the new password.
4.
Confi rm Password: Input the new password once
again. Confi rm password must be the same
as the New password. System will inform you
“Change password successfully!” while they are
the same, or inform you to input the password
of Confi rm password once again when they are
not the same.
4.3.6 OSD Setting
1. OSD Timeout: Press
keys toselect from
1 to 10 by step1. The default values Is 5.
2. OSD Transparency: Press
keys to select
among Off, 10%, 20%, 30%, 40%. The default
option is Off.
Press MENU or EXIT key to save and exit.
