Symmetricom ND-SERIES Скачать руководство пользователя страница 16

Страница: 16 / 47

ND Clocks User Manual - Rev 2.0.1 Sep-08

Symmetricom

, Inc.

duplicate IP address condition, the network clock will be re-assigned a fallback IP address of

169.254.xxx.xxx ]

169.254.xxx.xxx IP (fallback) address

DHCP is enabled by default. If DHCP is enabled and no DHCP server can be found the ND clock will default to a

169.254.xxx.xxx address.

In addition, if an IP address conflict is determined when the Ethernet interface is initialized (either DHCP or static) the ND

clock will default to a 169.254.xxx.xxx address.

This 169.254.xxx.xxx is a link local address range (i.e. not allowed on the internet) and is used by Microsoft when their

DHCP clients cannot find a DHCP server.

To determine the cause of why the clock fell back to a 169.254.xxx.xxx address the user should display the status of the

clock.

Please see the “Status” section for details as to how to determine the cause of the fallback IP address.

[Note: Devices which have been assigned a fallback IP address of 169.254.xxx.xxx will be displayed in

the main WinDiscovery window with

RED

text, indicating a problem with the configuration.]

Device Name

Each clock is programmed at the factory with a factory device name. This name includes the model

name and a “MAC address” extension.

[Hint: You can change the device name to one convenient for your site – preferably one that helps you

to later identify the exact physical location of the device.]

Administrative Hub

[Note: the Administrative Hub configuration item is reserved for future use.]

Содержание ND-SERIES
















































Результаты поиска

Содержание ND-SERIES

Отзывы:

Бренды по названию

Популярные бренды

Symmetricom ND-SERIES, Руководство пользователя

Результаты поиска

Содержание ND-SERIES

Отзывы:

Бренды по названию

Популярные бренды