Symmetricom GoWide 4.6, Руководство пользователя

Страница: 71 / 134

1
GoWide 4.6 G.shdsl Bridge/Router – User Manual
71
Router Mode Configuration
097-91022-01 Issue 1: February 2002
2
5
3
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
4
4
WAN Port Configuration using PPPoA Client
Refer to Procedure N for information on configuring the WAN Port using PPPoA
Client.
Procedure N. Configuring WAN Port Using PPPoA Client
Step Procedure
1
Select PPPoA Client in the System Menu (Figure 43).
2
Enter the VPI value in the VPI field.
3
Enter the VCI value in the VCI field.
4
Select the Quality of Service type: UBR (default setting), CBR , or VBR . A pop-up screen appears. Enter the
appropriate information.
5
Select either None , CHAP , or PAP under Authentication ( None is the default setting).
6
Enter a numerical value in the Time Out field.
7
If specifying a local IP address is desired, click the Specify an IP Address box under Local IP .
8
Enter a value in the Subnet Mask field.
9
If RIP is not desired under Routing Table , deselect the box ( RIP Allowed is the default setting).
10
If NAT is desired, click the NAT box under Advanced .
11
Click the Apply button if all data is correct.
End of Procedure