Symmetricom GoWide 4.6, Руководство пользователя

Страница: 69 / 134

1
GoWide 4.6 G.shdsl Bridge/Router – User Manual
69
Router Mode Configuration
097-91022-01 Issue 1: February 2002
2
5
3
S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S S
4
4
WAN Port Configuration using RFC1483
Refer to Procedure M for information on configuring the WAN Port using RFC1483.
Procedure M. Configuring WAN Port Using RFC1483
Step Procedure
1
Select RFC1483 in the System Menu (Figure 42).
2
Enter the VPI value in the VPI field.
3
Enter the VCI value in the VCI field.
4
Select the Quality of Service type: UBR (default setting), CBR , or VBR . A pop-up screen appears. Enter the
appropriate information.
5
Select the Encapsulation type: LLC (default setting) or VCMUX .
6
If obtaining an IP automatically is desired under Local IP, click the Obtain an IP automatically box. Otherwise,
enter the value for the Local IP in the Local IP field.
7
Enter the value for the Subnet Mask in the Subnet Mask field.
8
Select either Set as Default Route , Edit Routing Table , or RIP under Routing Table ( RIP is the default setting).
9
If NAT is desired, click the NAT box under Advanced .
10
Click the Apply button if all data is correct.
End of Procedure