Symetrix 562E Скачать руководство пользователя страница 6

Страница: 6 / 26

562E

Sidechain Processing Section

. K

YPASS

switch -

The E

. K

switch position

activates the K

NPUT

on the

rear of the 562E, and allows
externally-triggered gating/
expansion. The E

. K

switch position must be chosen
in order to use an external
signal, applied to the K

NPUT

, to control the gating and

expanding action, or to route
the external key signal to the

output of the 562E. The B

YPASS

switch position disengages the expander and gate functions.

The I

switch position engages the expander and gate functions, using the 562E’s internal

sidechain signal to control the gating and expanding action. The I

switch position also

allows you to route the internal sidechain signal to the output of the 562E. The I

switch

position is the normal operating switch setting for the 562E.

Note

If you set the E

YPASS

switch to the E

position, with no audio

applied to the K

NPUT

jack on the rear of the 562E, the 562E’s gate/expander will

release (close).

UTPUT

SSIGN

switch - The K

ISTEN

switch position allows you to route the external key

audio or the internal sidechain audio to the output of the 562E. This is useful for monitoring
an external signal that you are applying to the K

NPUT

or for monitoring the internal

sidechain signal. It is also helpful in fine tuning any EQ changes that you are making to the
external signal before it reaches the K

NPUT

of the 562E. The W/F

ILTER

switch position

allows you to monitor the external key audio or the internal sidechain audio at the output of
the 562E, after it has been processed by the L

and H

IGH

filters. This is helpful in

fine tuning the effect of the L

and H

IGH

filters on the key/sidechain audio. The

ATE

. switch position routes the gated/expanded audio to the output of the 562E. The

ATE

. switch position is the normal operating position for the 562E.

control - Adjusts the cutoff frequency (3dB-down point) of a high-pass filter that is

applied to the sidechain audio. Sidechain audio at frequencies above the cutoff frequency is
uniformly passed. Use the L

control to rolloff any rumble and other low frequency

information that you do not want the 562E to use for control.

IGH

control - Adjusts the cutoff frequency (3dB-down point) of a low-pass filter that is

applied to the sidechain audio. Sidechain audio at frequencies below the cutoff frequency is
uniformly passed. Use the H

IGH

control to rolloff high frequencies that you do not want

the 562E to use for control (example: use it to filter out the hi-hat cymbals when you are using
the 562E to gate the toms on a drum set).

INDOW

DVANCE

switch - Subtly delays the audio signal energy that is fed to the expander/

gate, relative to the audio signal in the sidechain. It permits the expander/gate to open before
the audio signal passes through the VCA, thereby preventing the expander/gate from clipping
the leading edge of the audio signal waveform. Use the M

switch setting for more delay

(good for drums), and use the M

switch setting for less delay (great on cymbals). The O

position bypasses the W

INDOW

DVANCE

feature.

Front Panel Overview

Chapter 4

HIGH CUT

WINDOW

MAX

20K

ADVANCE

OFF

40K

400Hz

MIN

LOW CUT

OUTPUT

200Hz

15Hz

ASSIGN

20Hz

50Hz

EXT.KEY

KEY LISTEN

10Hz

GATE/EXP.

BYPASS

W/FILTER

CH1 SIDECHAIN PROCESSING

Содержание 562E



























Результаты поиска

Содержание 562E

Отзывы:

Похожие инструкции для 562E

Бренды по названию

Популярные бренды

Symetrix 562E, Руководство пользователя

Результаты поиска

Содержание 562E

Отзывы:

Похожие инструкции для 562E

Бренды по названию

Популярные бренды