Symeo LPR
®
-System
LPR
®
-2DB
Product Documentation
Commissioning
Copyright © Symeo 2012
Page 57 of 132
(only Mode 2 and 3
–
master transponder)
No modification necessary for mode 1, 2a and 3a
stationXX#_config.txt
(all transponders)
No modification necessary
The “XX”-sign replaces the Cell number of the master transponders, the
„M“-sign indicates the master station-ID 30. The “XX”-sign replaces the
Cell nu
mber of the transponders, the „#“-sign the station-ID.
7.2.1
File basestation_config.txt
This file is preconfigured by delivery and needs no changes.
7.2.2
File stationXXM_config.txt
This file for the master transponder only exists in mode 2b (Managed
cell) and mode 3b (TDOA). In mode 1 (Basic cell) the base station(s)
organize(s) the measurements and the master transponder is not be
applied. In 2a and 3a a file XXM_config.txt exists but no changes of this
file should be done.
Figure 38
– Entry of transponder coordinates in the file XXM_config.txt (only mode 2b and
3b)
