Symeo LPR
®
-System
LPR
®
-2DB
Product Documentation
Hardware
Copyright © Symeo 2012
Page 29 of 132
4.2.5
Lumberg Connector Type 0233 08
Figure 11 - Solder side view of the pin
assignment of the Lumberg power connector
plug (power supply with integrated service
port)
For configuration of the connector with cables, you have to identify the
matching pin assignment on the solder side.
The connectors have an anti twist device.
Option 1: It is possible to order cables (length: 5 m) by Symeo with
integrated Lumberg connector and cut cable head (see chapter 4.3).
Option 2: It is possible to order a connector box to wire all cables (see
chapter 4.3.2).
When plugging the push pull connectors into their sockets check that
the plug doesn’t slip out of the socket when pulling slightly at the cable.
4.3 Cables for Compact Station
4.3.1
Cable for Power Supply
Cables are delivered with a cable length of 5m and can be cut to the required length.
Pin
Function
1
UBB (+)
2
UBB (-)
3
LPR data port RXD
4
LPR data port TXD
5
Network diagnostic port RXD
6
Network diagnostic port TXD
7
GND-RS232
8
GND RS232
