11
Q u i c k R e f e r e n c e
6. If you are using the in-line fuse holder supplied with the cra-
dle (optional):
a. Make sure the fuse holder contains a 2 Amp slow-blow
fuse.
b. Splice the fuse holder to the end of the red V+ (9-32VDC)
wire, as shown above. Make the distance from the fuse
to the power connection point as short as possible. Place
a CAUTION label on each fuse holder.
Shield Wire
(bare wire)
2A Fuse &
Fuse Holder
(optional)
Ground Wire
(black)
No Connect (white)
V+ power (red)
