9
Q u i c k R e f e r e n c e
Note:
The cradle chassis must be grounded to the truck
chassis.
2. Prepare the mounting surface to accept four #8-32 studs in
the pattern shown below. You need to drill four holes with a
#10 drill bit.
3. Install the cradle on the mounting surface.
a. Position the cradle on the mounting surface.
b. Fasten it using four #8-32 self-locking nuts.
Caution: Do not install the cradle on or near an airbag cover
plate or within an airbag zone. Also, do not install it in a
location that will affect vehicle safety or driveability.
Holes for Studs
Note: Tolerance on all
dimensions: +/- 0.005 inch
