Symbol PTC-870IM, Руководство пользователя

Страница: 45 / 72

Beep codes
Five beeps
•
Five beeps means the bridge battery is running out
of power. If you hear these beeps or if the PTC has
been disconnected from AC or vehicle power for
more than 60 hours, reconnect the power and allow
the bridge battery to recharge for 10 to 12 hours.
Power LED codes
The Power LED is off
•
The PTC is off. Press the On/Off button to activate
it.
The Power LED is glowing steadily
•
The PTC is on and is receiving power.
The Power LED is blinking slowly
•
The PTC is in sleep mode. Press the On/Off button
to activate the PTC and your application.
The Power LED is blinking quickly
•
The PTC is booting. Wait for a prompt or your
application to appear on the screen.
Common solutions
If you experience any of the problems in this section,
follow the instructions provided.
The PTC does not turn on
•
Check the PTC’s vehicle or AC power connection.
Follow the instructions on page 46 .
•
Warm boot the PTC.
•
Contact your Telxon service representative.
43