Symbol PTC-870IM, Руководство пользователя

Страница: 48 / 72

Rebooting the PTC
13
If your application locks up (stops responding to the
keyboard), reboot your PTC. Rebooting stops the
application, stops the PTC, resets the unit, and then
restarts (boots) it. Under normal circumstances, a
warm boot unlocks the unit.
Performing a warm boot
! Any data that was not saved
before the application locked up
will be lost.
When you perform a warm boot, all programs and
data saved in RAM are preserved. When the PTC
starts again, it returns you to the beginning of the
application, not to where you left off.
1. Turn off the PTC.
2. Hold down the Increase Contrast button and the
On/Off button.
3. Release the Increase Contrast button.
4. Press and release the Increase Contrast button.
5.
Release the On/Off button. Reset is now complete.
6. Press the On/Off button to restart the PTC. The
Power LED blinks quickly to indicate a reboot.
The screen is blank for up to 10 seconds while the
unit begins its boot sequence.
46